Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox Heating & Furnace in Mesquite: What to Know First
We provide independent Lennox heating and furnace service in Mesquite, NV, and most repairs are finished in a single visit, usually within one to two days of your call. Common furnace repairs here run $150 – $700, and you’ll get an upfront price before we touch anything. As an independent Lennox service provider, we’re not affiliated with or authorized by Lennox. This page is for Mesquite homeowners who own a Lennox furnace, want straight talk about what’s wrong with it, and want it fixed right the first time. Call (888) 570-3601 and a live person will pick up.

How Lennox Products Fail – and How We Fix Them
Lennox builds solid equipment, but every brand has its patterns. Here’s what we actually see on Lennox heating jobs around Mesquite, and how we handle each one.
- Ignitors that fail after a hot summer. On the Elite and Merit gas furnaces, the hot-surface ignitor is the part we replace most. Mesquite’s long cooling season means the furnace sits idle for months, and when the first cold night hits, a worn ignitor won’t light. We test the ignitor and the flame sensor together, because a dirty sensor mimics an ignitor failure. Replacing only the ignitor leaves you calling us back in a week.
- Pressure switch and flue problems in Signature-series furnaces. Two-stage Signature units are fussy about venting. A partial flue or condensate blockage trips the pressure switch and the furnace locks out. We check the switch, the tubing, and the vent path rather than swapping the switch and hoping.
- Heat exchanger cracks. The heat exchanger is the safety-critical part of any gas furnace, and on older Lennox units we find cracks along the seams and at the cell bends. A cracked exchanger can let carbon monoxide into the living space. This is not a part you inspect or repair yourself; we test it and tell you plainly whether it’s safe to run. On units still under a Lennox lifetime heat-exchanger warranty, we handle the parts paperwork so you’re not stuck paying for a covered component.
- Gas valve and control board faults. Intermittent gas valve failures on the G-series furnaces show up as short cycling or a furnace that lights and drops out. We diagnose the valve against the board before replacing either, since the symptoms overlap and a wrong guess costs you money.
- Blower and limit switch wear. Older Lennox furnaces develop blower motor drag and nuisance high-limit trips, especially after a dusty spring. Cleaning and testing the blower and limit switch often solves what looks like a big repair.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Our Lennox Heating & Furnace Process
Every Lennox job runs the same way, whether it’s a tune-up or a furnace replacement.
- 1
We answer, in person. A live person takes your call day or night and books a time we’ll actually keep.
- 2
We diagnose on site. Our technicians, who have up to 8 years of experience, test the furnace and tell you what’s wrong in plain language.
- 3
We give you a fixed price. The price quoted is the price paid. No surprises on the invoice.
- 4
We decide on parts. For warranty-covered Lennox work we use OEM parts. When warranty isn’t a factor and a quality aftermarket part fits, we’ll explain the trade-off so you choose.
- 5
We test and clean up. The furnace runs through a full heat cycle before we call it done, and we leave your home the way we found it.
- 6
We stand behind it. Every job carries our 90-Day Done Right Promise. If it’s not right, we make it right, in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Lennox Heating & Furnace Costs in Mesquite
Here are the ranges we see for Lennox heating work in Mesquite. Your exact price depends on the part and the diagnosis, but the quote you get is the quote you pay.
| Service | Typical range |
|---|---|
| Furnace repair (ignitor, sensor, gas valve, blower) | $150 – $700 |
| Seasonal furnace tune-up | $80 – $200 |
| Furnace replacement | $3,500 – $7,500 |
What moves the price: the part itself (OEM versus aftermarket), whether the heat exchanger is involved, and whether a full furnace replacement makes more sense than a repair. Estimates are free, and we’ll give you a straight answer on repair versus replace.
Why Mesquite Homeowners Call Fireside Heating & Air Co. Mesquite for Lennox Work
Lennox owners in Mesquite call us because we answer the phone at 2 a.m., quote a price we stand behind, and finish most jobs in one visit. Our technicians are background-checked and uniformed, trained as journeymen, and trained on nine major brands, including Lennox, plus Carrier and Trane when you need a second system looked at. We’re not the lowest bid, and we don’t try to be. We’re the company you call once and keep. Every repair is backed by our 90-Day Done Right Promise, so if it’s not done right, we make it right, no arguing, no paperwork games.
FAQs
Most Lennox furnaces carry a parts warranty, and many have a longer heat-exchanger warranty, but coverage depends on the model and the original install date. Check your paperwork, and we’ll help you read it. We handle the parts paperwork so a covered repair doesn’t cost you out of pocket. Call (888) 570-3601 for an exact quote, and estimates are free.
We use OEM Lennox parts when your warranty requires it, and quality aftermarket parts when it doesn’t and they’re the smarter buy. We’ll explain the difference and let you decide. Call (888) 570-3601 and we’ll talk it through.
If the furnace is older, has a cracked heat exchanger, or needs a repair that costs a large share of a new unit, replacement usually makes more sense. If it’s a single failed part and the unit is sound, repair is the right call. We’ll give you the straight comparison. Call (888) 570-3601 for a free estimate.
Most Lennox heating calls in Mesquite are handled within one to two days, and emergencies get priority. A live person answers every call, day or night. Call (888) 570-3601 and we’ll set a time we’ll keep.
The most common cause on Elite and Merit furnaces is a worn ignitor or a dirty flame sensor, both cheap to fix. Before you assume the worst, let us diagnose it. Call (888) 570-3601 for a free estimate.
Written by the team at Fireside Heating & Air Co. Mesquite, serving Mesquite and nearby areas.